Two free Environmental and EMC webinars
After Previous Successfull Webinars TÜV SÜD Product Service are hosting another two free webinars on EMC – “Fundamentals of Design & Testing” and an Environmental webinar on - “Failure modes of environmental tests”
Environmental - Failure Modes of environmental tests -
Wednesday 18th August 2010
2.00pm - 3.00pm
Overview of Presentation
Products can have very complex failure modes as a result of exposure to environmental conditions but the root cause of a failure can often be traced back to the fairly simple effects of each or a combination of environments. The webinar will take a fairly simple look at the typical failure modes attributable to each environment and discuss the difficulties of specifying and performing environmental tests
Who Should Attend
This presentation is at a basic level. It will appeal to those fairly inexperienced in environmental testing, who may be involved in the environmental qualification of a product and need to understand; What test environments they should apply, The typical failure modes which could occur in each environment , the issues of simulating these environments and how this could affect the severity of the test.
| Benefits of Attending |
This webinar will introduce the possible failure modes of products when exposed to environmental conditions. Also it will help the understanding of environmental testing exposing how the inadequate specification of a test could result in the wrong severity or an ineffective test. |
ONLINE REGISTRATION NOW OPEN - CLICK HERE TO ACCESS REGISTRATION.
EMC - Fundamentals of Design and Testing -
Wednesday 29th September 2010
2.00pm - 3.00pm
Overview of presentation
A brief overview of the EMC directive followed by a discussion of common EMC problems and issues that arise during an equipments design and development phase as well as avoidance measures and solutions to these issues that can be implemented. After this there will be a talk on key points of test plan development and generation to ensure full compliance has been achieved.
Who should attend
All personnel involved with design and development of electrical and electronic equipments including basic to full system engineering, quality control and project management.
| Benefits of Attending |
A full overview and appreciation of EMC from the EU directive right through to the final build testing before placement or marketing of the product. |
ONLINE REGISTRATION NOW OPEN - CLICK HERE TO ACCESS REGISTRATION
If you experience any difficulties or have any further questions about the webinar, please contact Simon Middleton at smiddleton@tuvps.co.uk.
